Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
knightvape

Junior Member
Registered:
Posts: 3
Reply with quote  #1 
hello
I have a problem device boxer dna 133 does not work what is the solution?
it is work on the welcome screen and then turns off
how can i fix the problem ??
thank you
BillW50

Avatar / Picture

Senior Member
Registered:
Posts: 754
Reply with quote  #2 
I would connect it up to EScribe and check in the Device Monitor. Usually it turns on and then off because one of the cells is way off from the other one(s).
knightvape

Junior Member
Registered:
Posts: 3
Reply with quote  #3 
if i connect it up to escribe it turns on After that if i disconnect it turns off and if i push the fire button showing welcome theme and turns off again
BillW50

Avatar / Picture

Senior Member
Registered:
Posts: 754
Reply with quote  #4 
Yes I know, but EScribe's Device Monitor will display the cells voltages as well as the pack voltage. It is acting like it isn't happy with one or more of them. So I would like to know what voltages it says they are. If they are fine, maybe it got configured to a 3 cell when it is supposed to be a 2 cell.
knightvape

Junior Member
Registered:
Posts: 3
Reply with quote  #5 
What should you be ?
BillW50

Avatar / Picture

Senior Member
Registered:
Posts: 754
Reply with quote  #6 
Cell 1 should be battery 1 voltage and cell 2 is battery 2 voltage (both should read almost if not the same or the DNA200 will turn off) and the pack should be the two added together. Cell 3... well there isn't a battery 3 and normally it should read 0v. But one of mine floats around between 0.50v to 1.10v. I could fix it, but I don't think it is actually affecting or hurting anything. So I have left it alone.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.