Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
arnett287

Junior Member
Registered:
Posts: 8
Reply with quote  #1 
What's up guy's. My partner has came across a puzzling issue. Has anyone used battery tubes in a 133 of so do you have a diagram. Everything is wired exactly like you would on a sled and nothing happens
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #2 
Are the tubes isolated (electrically) from the case?

I have not seen a diagram as it all depends how you are fitting the tubes in the case, because the cells are in series you can't have both tubes grounded to the case.

__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
arnett287

Junior Member
Registered:
Posts: 8
Reply with quote  #3 
They are in a stabilized wood enclosure separated by wood and acrylic
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #4 
Great, I'll have a quick bash in paint, it won't be pretty I'm afraid, but if anyone has one please post it.
__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
arnett287

Junior Member
Registered:
Posts: 8
Reply with quote  #5 
Awesome man I appreciate it, seems the forum is dead
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #6 
2cell tube wiring.png 
You can just jump terminals 2 & 3 you don't have to have 2 wires, hope this makes sense.


__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
arnett287

Junior Member
Registered:
Posts: 8
Reply with quote  #7 
That's how it's currently wired. And can't get anything more than a flicker of the screen. Hmmm
arnett287

Junior Member
Registered:
Posts: 8
Reply with quote  #8 
I'm trying to get him to send a picture of it to post
arnett287

Junior Member
Registered:
Posts: 8
Reply with quote  #9 
Hopefully this is clear enough

Attached Images
jpeg IMG_2902.JPG (366.15 KB, 29 views)

retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #10 
Anything unusual in Escribe or Device Monitor?


__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #11 
It could just be that the screen cable has got damaged, try hooking it up to EScribe Device monitor and looking at the cell levels, also on the Themes tab you can get a capture of what the screen should be showing.
__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
arnett287

Junior Member
Registered:
Posts: 8
Reply with quote  #12 
Thanks guys, I'll re update tomorrow when back at the shop.
arnett287

Junior Member
Registered:
Posts: 8
Reply with quote  #13 
Alright we have changed the cells to 2 in escribe and everything reads in that program. Once we unplug it from the USB with cells inserted nothing happens. I know the problem is not getting the power to the board at that point, but we have used every suggested diagram given
dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #14 
If you can determine pack is present at B+ and B- using a meter then you need to check for pack voltage between B- and the upper (towards center) end of the fuse.
Keep in mind that the board is coated so it may be difficult to make a connection at the fuse.
Or without battery connected check for continuity between B+ and upper end of fuse.

__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.