Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 1 of 2      1   2   Next
iamiam

Junior Member
Registered:
Posts: 5
Reply with quote  #1 
Just got my VT75 today. I went through the tutorial but don't see anything about battery setting. Do I need to input battery information anywhere if I'm sing a 18650?
ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #2 
under the mod tab in escribe make sure you have lithium ion 18650 selected and set your cell soft cutoff to not less than 2.6
if you want to to input the watt hour of a battery, run battery analyzer. there's a box you can also check if you plan to use an external battery charger.

__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #3 
I don't bother changing any of the battery settings and it works well with 25Rs.
__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
Mangiman

Avatar / Picture

Junior Member
Registered:
Posts: 16
Reply with quote  #4 
This new chip runs on 3s LiPo or 2s or 1s ???
__________________
Mangiman
awsum140

Avatar / Picture

Senior Member
Registered:
Posts: 203
Reply with quote  #5 
The DNA75 runs on a 3.7 supply voltage, 1s.
iamiam

Junior Member
Registered:
Posts: 5
Reply with quote  #6 
Quote:
Originally Posted by ChunkyButt200
under the mod tab in escribe make sure you have lithium ion 18650 selected and set your cell soft cutoff to not less than 2.6
if you want to to input the watt hour of a battery, run battery analyzer. there's a box you can also check if you plan to use an external battery charger.

Thank you . There was a "Manufacturer Settings" under the Mod tab which I missed the first few times. I'm using Sammy 30Q with the cutoff value of 3V and Max Input @ 20A and Pulse Input of 30A. Or is there a list somewhere of all manufacturer specs?
Mangiman

Avatar / Picture

Junior Member
Registered:
Posts: 16
Reply with quote  #7 
Anybody knows where to get a LiPo 1s with xt60 connector and does the micro usb port on board will charge it?
__________________
Mangiman
ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #8 
Quote:
Originally Posted by Mangiman
Anybody knows where to get a LiPo 1s with xt60 connector and does the micro usb port on board will charge it?
www.hobbyking.com has lipos and connectors. the dna 75 has an on board 1 amp charger that is powered from the micro usb port.

__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
Mangiman

Avatar / Picture

Junior Member
Registered:
Posts: 16
Reply with quote  #9 
Can i use a 6400 MAH 1s LiPo with 90c or should be below 90c?
__________________
Mangiman
ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #10 
Quote:
Originally Posted by Mangiman
Can i use a 6400 MAH 1s LiPo with 90c or should be below 90c?
you could use that lipo. the 90c rating is fine, overkill, but fine. the board only draws 30 amps max. a 30c will even do. but yes the lipo you asking about WILL work.

__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
olafeone

Avatar / Picture

Junior Member
Registered:
Posts: 2
Reply with quote  #11 
Can anyone tell me what to put in VT75 for my AWT 26650 3.7V 4500mAh 75 A battery plz ?
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #12 
Saw this test of your battery:

https://www.e-cigarette-forum.com/forum/threads/awt-75a-4500mah-26650-bench-test-results-only-a-10a-battery.703276/



__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

VapingBad

Avatar / Picture

Administrator
Registered:
Posts: 2,449
Reply with quote  #13 
You don't need to change the defaults, but it would: type: 18650 soft cell cut off: 2.75 V, you need options - user interface - manufacture to get to the settings in the latest version.
__________________
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •

Latest versions of EScribe: DNA 200/250DNA 75
Common problems
olafeone

Avatar / Picture

Junior Member
Registered:
Posts: 2
Reply with quote  #14 
Thanks a lot , i have already done these.. i have the releaux dna 200, So i know these stuff but i ask if i need to load any CSV for the battery.If it is needed
retird

Avatar / Picture

Administrator
Registered:
Posts: 1,187
Reply with quote  #15 
Quote:
Originally Posted by olafeone
Thanks a lot , i have already done these.. i have the releaux dna 200, So i know these stuff but i ask if i need to load any CSV for the battery.If it is needed


Why not just run "Battery Analyzer" ?  That should analyze your battery capacity and discharge profile.

__________________
I am not an employee of and do not represent Evolv Inc.  My opinions are just that and are not meant to be fact or even correct.

Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.