Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
Mac

Junior Member
Registered:
Posts: 14
Reply with quote  #1 
Is the Battery Ground Common to the Out ground?  If so is it possible to connect the high current ground direct from the battery to the 510 or would it still need to go through the board?

Mac
John

Avatar / Picture

Administrator
Registered:
Posts: 500
Reply with quote  #2 
They are common, but remember the board itself needs a ground connection too.
malcbzt

Avatar / Picture

Junior Member
Registered:
Posts: 21
Reply with quote  #3 
is there explained like I'm five how to solder battery connection, balancing connector from the dna200 box and 510 ? I will use referance case [smile] 
Mac

Junior Member
Registered:
Posts: 14
Reply with quote  #4 
Thanks, John
jgstrings88

Junior Member
Registered:
Posts: 3
Reply with quote  #5 
malcbzt if you need soldering instructions on board to 510, Balance conn and ground connections, I would advise starting with something else than this somewhat pricey, very nice regulator.  

Lots of good soldering tutorials and practice with these particulars like 510 connectors.  This definitely isn't a first mod type build.  If I'm mistaken about what you meant sorry.
Jef

Junior Member
Registered:
Posts: 2
Reply with quote  #6 
This post was helpful as My cell orientation will take advantage of the boards ability to acceptance cell negative at location other than overcrowded balancing location. Thank You!
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.