Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
bluntmoment

Junior Member
Registered:
Posts: 16
Reply with quote  #1 
1st attempt on DNA 250 the negative was a success but the positive I over soldered and it seems it have pulled up a little. Now it's pulling up with a small piece of circuit board. It is still attached to a bad soldering job. Hey it was my first attempt. But Can I send it in to have it fixed? I'd hate to just throw it away.
dwcraig1

Avatar / Picture

Administrator
Registered:
Posts: 1,248
Reply with quote  #2 
Quote:
Originally Posted by bluntmoment
1st attempt on DNA 250 the negative was a success but the positive I over soldered and it seems it have pulled up a little. Now it's pulling up with a small piece of circuit board. It is still attached to a bad soldering job. Hey it was my first attempt. But Can I send it in to have it fixed? I'd hate to just throw it away.

Ask that here: https://helpdesk.evolvapor.com/index.php?a=add&category=1
I suspect you will be happy with the answer.

__________________
I am not connected with and do not represent Evolv Inc. All opinions are my own. They are just opinions and may not be correct.
bluntmoment

Junior Member
Registered:
Posts: 16
Reply with quote  #3 
thank you!
awsum140

Avatar / Picture

Senior Member
Registered:
Posts: 203
Reply with quote  #4 
Back, in ancient times, when I was in tech school that was called "the RCA method"...learn by doing.  Pre-tin the wire, lots of heat with just a short time in contact, good solder and good flux will help prevent those kinds of problems.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.