Evolv DNA Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
clank

Junior Member
Registered:
Posts: 9
Reply with quote  #1 
So I have a DNA 200 with a .25 Uwell Crown coil. Ive had it in there for about a week, however the Vaporshark DNA 200 is still reading coil at .35+ Is this normal ?
ChunkyButt200

Avatar / Picture

Administrator
Registered:
Posts: 1,516
Reply with quote  #2 
Quote:
Originally Posted by clank
So I have a DNA 200 with a .25 Uwell Crown coil. Ive had it in there for about a week, however the Vaporshark DNA 200 is still reading coil at .35+ Is this normal ?
are you vaping it in power or tc mode? since the crown coils are SS, the ohms will rise from .25 when firing in power mode. that is normal. if you're saying your COLD resistance is .35 then sounds like a connection problem somewhere = coil, coil base, dirty, loose 510 etc. check and see what the mod resistance is set to in escribe. i think VS set it to 0.002?  another trick = 'hard reboot' from escribe.

do you have other mods to get a resistance reading from the coil in question?

i know my .5 crown coils read as .52 in TC.

__________________
1.21 JIGAWATTS............GREAT SCOTT!........WHAT THE HELL IS A JIGAWATT?
• I am not employed by nor do I represent Evolv Inc.  All opinions are my own, they are just opinion not fact and can be wrong •
Latest versions of EScribe: DNA 200 • DNA 75  Common problems
EVOLV HELP DESK - https://helpdesk.evolvapor.com/?a=add
LOST VAPE WARRANTY REPAIR - http://www.lostvaperepaircenter.com
blueridgedog

Avatar / Picture

Moderator
Registered:
Posts: 573
Reply with quote  #3 
And a replacement coil reads?  Higher resistance readings are typically related to resistance from the 510, the 510 to atomizer connection and the atomizer.  .1 is significant.
dl12345

Member
Registered:
Posts: 47
Reply with quote  #4 
While I was still vaping prebuilt coils, I found many were 0.1 ohm over the rated ohms. If you put the atomizer in a different mod or in an ohm reader, does it give a different reading?
FiniteWill

Junior Member
Registered:
Posts: 1
Reply with quote  #5 
I am having the same issue with my Tuglyfe DNA200. I am using a Cleito with the .4 coil. All my other devices read it as .43, but the cold resistance in escribe reads it as .63, and it is a very disappointing vape. Mod resistance is set to .006, tried a hard reboot as well, that did not solve the issue. 
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.